There are a few simple steps to doing an oil change. 1. You need the proper tools, you will need five quarts of oil, a oil filter for your car, an oil pan, a wrench for the drain plug(varies on size from car to car), filter wrench(there are different sizes and styles). 2.Run your car for about ten minutes(the oil will drain easier) 3. Then pull your car up un ramps and place something …
showed first 75 words of 206 total

showed last 75 words of 206 total
…little of the new oil on the seal and hand tighten 1/4 turn past when you feel it start to get tight. 7. Replace the drail plug CAUTION STILL HOT!!! 8.Put four quarts of oil in the engin. Start you car for two to three minutes. Check the oil leval and add or remove some as needed. 9. Back your car of the ramps BE CAREFULL CAN DAMAGE BUMPER IF YOU GO TO FAST!!! 10. Clean up!!!! YOU'R DONE!!!